1. Self-learning remote control
2. Mainly apply to garage door
3. Copy most fixed code remote controls
4. Learning face to face in few seconds
5. Battery included
7. Coding Mode: Fixed code
8. Frequency: Fixed frequency 433.92Mhz
9. Battery Model: 27A, Voltage: 12V
10. Size: 31mm × 55mm × 14mm
1) Press and hold button LOCK and UNLOCK buttons together – LED will flash 3 times.
2) Keep pressing LOCK button, press UNLOCK button 3 times. Led will start flashing Non-stop.
3) Put both remotes Into “Side-by-Side” or “Back to Back” position! Make sure they have direct contact, touching each other.
4) Press and hold one button on your original remote and one button on your clone remote. Keep holding until led will make : 2 blinks > 3 blinks > Steady = Successfully cloned, only after the light goes into steady.